Introduction To CX40M Series Metallurgical Microscope
As an upgraded metallurgical microscope, CX40M optimized the performance by integrating the advantages of our marketableproducts ‘XYM’&’MX4R’ and the innovations of our new product ‘RX50M’ withmarketing demand. With excellent imaging performance and comfortable operatingexperience, CX40M provides high cost-effective solution for metallographicanalysis and industrial inspection.
With higher color correction and better coating design,new improved LMPlan series objectives enhance the image resolution and colorreducibility.
With the most suitable viewing degree, 30°inclined headholds everyone in the best working state, less tension and fatigue. You canadjust the interpupillary distance to optimum according to the scale on viewinghead.
Reflected illuminator with field/aperture diaphragm andoblique light device, as well as slots for polarizing kit and filters, adoptsLED Koehler illumination system.
Comparing with other LED, single 5W LED with warm whitelight (3000-3300K) reduces the fatigue on observer's vision at the extreme.
With pull-rod devices for adjusting the centers of fieldand aperture diaphragm, stray light can be eliminated by expanding or shrinkthe illumination zone.
Simple polarizing observation is available with pluggablepolarizer kit. More ideal images are here with different filters.
The highest sample can be tested is 28mm with transmitted& reflected frame while 78mm high sample is available with reflected frame,as the stage can be dropped 50mm by loosening the screw in the stage holder.
M4 wrench for socket head screws places in the frame,making the best of the available space and improving your working efficiency.
Up-limit device is helpful to avoid the damage caused byimpact between sample and objective.
Using the outstanding condenser system of New designedRX50M, much more transmitted light can be through with bigger numericalaperture and stronger intensity.
Bright field, oblique light and simple polarizing are allavailable with CX40M. Brightfield image with high brightness and highresolution shows original color of samples. And oblique light is used to show3D relief image.
Technical specifications
Optical system | Infinity color corrected optical system |
Viewing head | 30°inclined gemel binocular head, interpupillary distance: 54mm~75mm, left diopter ±5 adjustable |
30°inclined gemel trinocular head, interpupillary distance: 54mm~75mm, diopter ±5 adjustable, splitting ratio R:T=100:0 or 50:50 | |
Eyepiece | High eye-point wide field plan eyepiece PL10X22mm |
High eye-point wide field plan eyepiece PL10X22mm, with reticle | |
High eye-point wide field plan focusing eyepiece PL10X22mm | |
High eye-point wide field plan eyepiece PL15X16mm | |
Objective | LWD plan achromatic metallurgical objective 5x/10x/20x/50x/100x |
Nosepiece | Reversed quintuple nosepiece |
Focus Adjustment | Transmitted & Reflected frame, coaxial focus system with tension adjustment and up-limited device, coarse range: 28mm, fine precision: 0.002mm. Stage can be adjusted up and down, 28mm high sample is available. |
Reflected frame, coaxial focus system with tension adjustment and up-limited device, coarse range: 28mm, fine precision: 0.002mm. Stage can be adjusted up and down, 78mm high sample is available. | |
Stage | Double layer mechanical stage with X/Y coaxial adjustment, size: 175mmX145mm, moving range: 76mmX42mm. |
Metal plate for transmitted frame; glass plate for transmitted & reflected frame. | |
Reflected illumination | Wide-range voltage 100V-240V_AC50/60Hz, reflected lamp-house with single 5W LED, warm color. Koehler illuminator with oblique light device, center adjustable field and aperture diaphragm |
Transmitted illumination | Wide-range voltage 100V-240V_AC50/60Hz, transmitted lamp-house with single 5W LED, warm color. |
Condenser | N.A.0.9 swing-out achromatic condenser for transmitted frame, with center adjustable aperture iris diaphragm. |
Other accessories | Yellow/neutral/IF550/LBD filter for transmitted light |
Digital camera adapter: 1X, 0.67X, 0.5X focusing C-mount, 3.2X photo eyepiece, photo tube with PK or MD mount, relay lens Interference filter for reflected light: | |
High precision micrometer, scale value 0.01mm |
